Tag Archives: D.I.Y.

Five Semi-Homemade Valentines

Hi everyone! While I get my January favorites ready I just wanted to put up a quick and easy Valentine’s Day tutorial. The template used for all the valentines can be found here –> Valentines Day Templates. Print that out on the paper of your choice (I used white cardstock) and let’s get started!

Semi-homemade Valentines Blog post

Popcorn Valentine

What you’ll need:

– Template
– Scissors
– Microwaveable Popcorn
– Tape

Step 1:

Cut out popcorn pattern from the template.

Popcorn step 1

Step 2:

Tape pattern to the front of the popcorn package.

Popcorn step 2

Oreo Valentine

What you’ll need:

– Template
– Scissors
– Individual Oreo package
– Stapler

Step 1:

Cut out Oreo pattern from the template.

Oreo step 1

Step 2:

Staple pattern to the end of the Oreo package.

Oreo step 2

Hershey Kiss Valentine

What you’ll need:

– Template
– Scissors
– Snack size bag
– Hershey Kisses
– Stapler

Step 1:

Place a handful of Hershey Kisses inside a snack size bag then seal.

Hershey kiss step 1

Step 2:

Cut out Hershey Kiss pattern from the template.

Hershey Kiss step 2

Step 3:

Staple pattern to the top of the snack size bag.

Hershey kiss step 3

Cup Valentine

What you’ll need:

– Template
– Scissors
– Cup
– Hole Punch
– String/ribbon

Step 1:

Cut out cup pattern from the template.

Cup step 1

Step 2:

Punch a single hole at the top of the pattern.

Cup step 2

Step 3:

Tie pattern tightly around the top of the cup.

Cup step 3

Pencil/Pen Valentine

What you’ll need:

– Template
– Scissors
– Pencil or pen
– Hole punch

Step 1:

Cut out writing utensil pattern from the template.

Step 2:

Punch holes in both side of the heart pattern.  Next, Slide pencil/pen through the holes.

Make sure the holes are big enough for your pencil/pen to fit through. (for this valentine I used a three hole punch because it creates bigger holes)

Pencil step 2

And there you have it… very affordable, cute and most importantly EASY homemade Valentines that are sure to impress your child’s classmates. Happy (almost) Valentine’s Day everyone!

Semi-homemade Valentines

Give my tutorial a try? Leave a comment. I’d love to hear whether or not it worked out for you.

– Katie

**BONUS**

Here’s how I will be packaging my Valentines.

What you’ll need:

– White paper bag
– Stapler
– Craft tape

Packaging

Advertisements

2 Comments

Filed under DIY and Crafts

DIY: Cornucopia Cupcakes

What you’ll need:

– Cupcakes
– Frosting, bag and Wilton 1M tip
– Bugles
– Runts

Step 1

Bake cupcakes then let cool completely.

Step 2

Pipe frosting swirl onto cupcakes

Step 3

Place a single Bugle and a few Runts onto the frosting in a Cornucopia form.

And volia! You’re done!

Sorry I’ve been a little M.I.A. lately but it’s finals week so things are getting hectic around here. I only have a few days of the semester left  then I’ll be back to posting regularly again! I promise!

– Katie

Leave a comment

Filed under Beginning Baker

DIY: Last Minute Semi-Homemade Halloween Treats

What you’ll need:

– Templates I created:
Mummy Little Debbie Cake Cover
  Frankenstein Popcorn Cover Color
Frankenstein Popcorn Cover B&W
– Scissors
– Clear tape
– Double stick tape
– Little Debbie Fall Party Cake
– Popcorn (single serve mini bag)

Step 1

Print out templates.

Step 2

Cut out the mummy, Frankenstein and bolts.

Step 3

Place double stick tape onto the front of the popcorn and party cake packages.

Step 4 – Mummy

Place mummy template in the center of the party cake and lightly press down. Tape one side down then tape the other. Make sure the template is tightly wrapped around the party cake to ensure it will stay in place.

Step 4 – Frankenstein

Place Frankenstein template in the center of the popcorn and lightly press down. Tape one side down then tape the other. Make sure the template is tightly wrapped around the popcorn to ensure it will stay in place.

Next, place a small piece of double stick tape on the bolts then place onto the sides of the Frankenstein face by the stitches.

And viola, you’re done!

I made these cute treats to give to the kids I nanny and decided to make a quick tutorial out of it. Enjoy!

– Katie

Leave a comment

Filed under DIY and Crafts

DIY: Tie-Dye T-Shirt

What you’ll need:

– Warm water
– Squeeze bottles
– White shirt
– RIT liquid dye
(colors of your choice)
– Rubber bands
– Scissors
– Bucket (one you don’t mind staining)
– Rubber gloves (optional, I didn’t use any)

Step 1

Wet the entire shirt then ring out water until it’s damp but no longer dripping.

Step 2

Fill the squeeze bottle with warm water leaving around a half an inch empty at the top.

Step 3

Add about 3 tbsp of RIT liquid dye into the squeeze bottles.

Step 4

Place lid onto the bottle then shake to evenly distribute the dye. I’d recommend hold the lid while shaking… just in case…

Step 5

Grab damp shirt from the center then begin placing rubber bands tightly around the shirt. Continue this process every few inches down the entire shirt.

Step 6

Start distributing dye onto your damp shirt over the bucket.  Continue this process in no particular order with whatever colors you choose. You want the colors to be kind of all over the place so don’t over think it too much.

Step 7

Let shirt sit for 5 minutes.

Step 8

Rinse shirt until the water runs clear.

Step 9

Carefully cut rubber bands off the shirt then rinse again until the water runs clear.

Step 10

Hang until fully dry then enjoy!

This DIY was requested by a friend of mine so I hope this helps her, as well as all of you out there who weren’t quite sure how to make your own tie-dye clothing. As you can see it’s pretty easy and super fun to make but as a warning you might want to get two shirts because you’ll want to start tie-dying everything in sight! Don’t say I didn’t warn you! If you have any questions you can leave them in a comment below and I’ll be sure to get back to you.

Give my tutorial a try? Leave a comment. I’d love to hear whether or not it worked out for you.

– Katie

Warning: the first few times you wash the tie-dyed items the color may bleed slightly so be careful what else you wash the newly dyed items with.

1 Comment

Filed under DIY and Crafts

DIY: Custom Crayons

What you’ll need:

– Razor or Exacto knife

– Knife

– Cutting board
(you may want to use a cutting board or other solid
surface you don’t mind ruining)

– Cookie Sheet

– Aluminum Foil

– Crayons

– Oven safe silicone mold(s)
(I got mine for 99 cents each from Ikea. Yes, only 99 cents!!!)

– Toothpicks

Step 1

Using a razor or Exacto knife carefully slice the crayon wrapper then remove. Repeat until the number of desired crayons is reached. I found it easiest to hold the crayon at the top (as shown in the top, right picture below) and slice the wrapper in one straight line.

*If you’re using a new pack of crayons the wrappers of certain colors will be a little trickier to remove. I’d suggest popping them into the freezer for about 15 minutes before you begin the unwrapping process. The slight freeze allows for easier removal.*

Step 2

Begin cutting the unwrapped crayons into small pieces. The pieces should be around ¼ of an inch or smaller. This will allow the pieces to fit into the forms small cracks.While cutting up the crayons I started off using one method but that was taking quite a bit of time so I switched to another. Listed below are both methods I used while cutting the crayons.

Method #1

Place a crayon onto the cutting board and hold as seen in the first photo below. Begin sawing at the crayon while applying pressure downwards. You should only need to saw a bit before it breaks into a small piece.

Method #2

Place a crayon onto the cutting board. Hold the knife as shown in the first picture below then apply pressure directly onto the index finger using your other hand (as shown in the second picture below). Be careful with your thumb placement during this method so it doesn’t get caught under the end of the knife.

I found this method more effective because it was the faster of the two.

Step 3

Once the desired amount of crayons have been cut, you can begin filling your silicone mold(s). This is the part where you let your creativity and imagination take hold. Play around with different patterns and color combinations to make each crayon unique. You’ll want to overfill the forms slightly so when the crayon pieces begin to melt it’s entirely filled with melted wax.

Step 4

Once desired amount of forms have been filled place the mold onto an aluminum foiled covered cookie sheet.

Step 5

Place cookie sheet into a 250 degree oven for 12-15 minutes. Time and temperature may vary slightly oven to oven.

*You basically just want to bake until all the crayon pieces have melted. I’d suggest checking the mold around the 10 minute mark and see how it’s doing.*

Step 6

Once all the crayon pieces have completely melted remove the cookie sheet from the oven. Using a toothpick pop any air bubbles you see on the surface of the melted wax.

*This step is kind of optional. If the air bubbles are not popped you just won’t have as smooth of a surface on the new crayons.*

Step 7

Carefully carry the silicone mold and place it into the freezer for 20 minutes. Try to avoid spilling the melted wax because obviously, it will burn if it gets onto your skin. After 20 minutes the new crayons should be completely hardened, as well as cool.

Step 8

After 20 minutes remove the mold from the freezer and set aside until it reaches room temperature. This step will help the new crayons release easier.

Step 9

Flex the mold back and forth a bit to loosen the new crayons. Once the crayons have been loosened, flip the mold over and start popping them out. You’ll want to do this with a careful hand so they don’t break when they’re released.

Repeat until all the crayons have been released and you’re done!

Since these crayons are so adorable and would make a great gift I decided to add on a quick and easy wrapping option.

What you’ll need:

– Small treat bags

– Ribbon

– Scissors

– Crayon

All you do is place a crayon into the small treat bag then tie off the top with a ribbon.

This craft is really inexpensive, easy, and I honestly had fun making them. I really hope you all will give it a shot. I also tested it out with the kids I nanny the next day, and they had a blast. Look for pictures from that day in August’s Nanny Bits post at the end of the month.

Give my tutorial a try? Leave a comment. I’d love to hear whether or not it worked out for you and what you came up with.

– Katie

Here are my casualties from the project: R.I.P. little fishes.

5 Comments

Filed under DIY and Crafts